Granville Petro Patch Putty Multi-purpose Metal Repair - 50g

Just Mix It And You've Fixed It

• Cures in just 1 hour
• Use on steel lead cast iron alloy brass copper and glas fibre

Granville Petro Patch Putty is a fast acting Epoxy Putty with hundreds of uses around the car home and industry.

Directions:

1. Ensure surface to be treated is clean and grease/dirt free. If possible sand and dry prepared surface.
2. Cut desired amount of product and remove protective paper.
3. Twist and knead until uniform in colour.
4. Work the product well into the damaged area. If applying to damp or slowly leaking areas force the product into holes/cracks and apply pressure to aid adhesion process.
5. Remove any access material.
6. In the case of pressurised saystems i.e. central heating etc. turn off circulating pump prior to commencing repair.
7. Initial cure will take after 1-4 hours dependent upon ambient temperature. Allow 24 hous for final cure. In cold conditions warm the product to slightly above room temperature.
8. When completely cured Petro Patch Putty can be drilled sanded or painted.
9. Although the product in the majority of applications will give a permanent repair it is advisable the the patch should be inspectedregularly for safety reasons - particularly in the case of largeer leaks.

Store in cool conditions away from excessive heat and direct sunlight