Shipping From Only £3.50

01473 822333
customer-services@partridgeshadleigh.co.uk

Liberon Boiled Linseed Oil, 1L

  • 5022640007138
Liberon

£14.25



In Stock

Add to Cart:


Delivery From £3.50 - Delivered to Mainland England, Wales and Southern Scotland For an accurate delivery quotation, please use our shipping estimator by adding item to basket and enter a delivery post code.


Product Description

Liberon Boiled Linseed Oil is used to give a mellow, patinated finish to new or stripped bare wood. A superior quality oil, similar to Raw Linseed, but having had hot air passed through to improve drying times, it is suitable for use on all types of wood, except exterior oak. It is also recommended as a sealer for terracotta tiles and other porous surfaces before waxing.

  • Provides a hard wearing, water resistant finish.
  • Traditional sealer for terracotta and stone floors.

Details:

  • Size: 1 Litre
  • Usage: Interior
  • Coverage: 1L=8-10m²
  • Application: Brush or Cloth
  • Drying Time: 24 hours between coats 4 days final
  • Tool Cleaning: White Spirit
  • MPN: 0014629-01

Preparation

Ensure that the surface to be treated is clean and dry. Any previous finish must be thoroughly removed before using Boiled linseed Oil.

Application

Ready to use. for ease of application dilute the first few coats with Liberon Pure Turpentine (up to 30%). Rub well into the wood using a lint-free cotton cloth. After about 20 minutes wipe off the excess with a clean lint-free cloth. Failure 10 do so will prevent penetration of future coats and leave a sticky surface. Repeat the previous steps once or twice at 14 hour intervals. Apply a final coat of Boiled linseed Oil, again wiping off any mm. Allow this final coat to harden for a few days before use. A light rubbing in between coats with Liberon Ultra Fine Steel Wool (0000) will improve results. If the surface becomes damaged, work in a new coat.

Important: Oil finishes bring out the natural colours of timber. I wet surface will be an indication of the final colour. Always test product on a spare surface or inconspicuous area for colour, compatibility and end result.

Cleaning and maintenance

Wipe surface with a damp cloth and buff dry. Re-oil as and when required depending upon usage.

Precautions

  • Store Liberon Boiled linseed Oil at a temperature above 5°C. Always replace the lid otherwise the oil can deteriorate.
  • CAUTION : Oily cloths can self combust. Do not leave impregnated cloths in bundles. Before discarding lay them flat out to dry to avoid a fire hazard.
  • If the excess is not removed and the surface becomes sticky wipe with white spirit to remove the sticky film and allow to dry before continuing.

Product Details
  • Our Code: 5022640007138
  • Product Weight: 1.11kg
  • 7 Units in Stock
  • Manufactured by: Liberon



Something wrong with our product description? Please Contact Us. We'll check and put it right if needed.

Product Images: Images used on this site are for illustrative purposes only. Please do not base your order on the image alone. Packaging/product labeling, if shown may be changed by the manufacturer without notice. Please see our Conditions of Use for further details.



Date First Available: Wednesday 03 November, 2021.



Copyright © 2021 M W Partridge & Co Ltd.