SALE - 10% OFF Selected Lines - On-Line Purchases Only

Shipping From Only £3.50

01473 822333

Aladdin Blue Flame Heater Wick Model 16 25 32 37 Post 1956 (P169901)

  • P169901

Sale: £16.65
Save: 10% off

4 units In Stock

Add to Cart:

Delivery From £3.50 - Delivered to Mainland England, Wales and Southern Scotland For an accurate delivery quotation, please use our shipping estimator by adding item to basket and enter a delivery post code.

Product Description

Blue Flame Heater Wick (New Pattern)

Suitable for use:

  • Series 37 32 25R and 16 Aladdin Heaters only


  • Part No. P.169901
  • Internal diameter: 75mm / 3in approx
  • External diameter: 85mm / 3 1/4in approx

EAN: 5020548169019

For Reference: The Blue Flame Series 16 P.160001 became obsolete in 1968.

Product Documents

Aladdin Wick Identification Chart Aladdin Wick Identification Chart
Aladdin Blue Flame (Series 16) Parts List Aladdin Blue Flame (Series 16) Parts List
Aladdin Blue Flame (Series 37) Instructions Aladdin Blue Flame 37 Instructions

PDF files on this page are for personal use only. If your computer can't open them, you may not have software that opens PDF files. Please use the following link to obtain the latest version of Adobe Reader: Download Adobe Reader

Product Details
  • Our Code: P169901
  • Product Weight: 0.1kg
  • 4 Units in Stock
  • Manufactured by: Aladdin

Additional Information


  1. Take out the flame spreader (perforated cap in centre of burner) and remove the burner basket by turning anti clockwise. Turn the wick up until the cog is free and then pull the wick and carrier out of the tank.
  2. Disengage the teeth on either side of the wick by pressing the top of the wick above
    the teeth and draw the old wick out of the carrier.
  3. Always handle a new wick carefully so that you do not damage the top edge.
    Keep carrier and throw old wick away.
  4. Holding the carrier in one hand with the flanged end at the top and the new wick in the other insert the tails through the top of the wick carrier until the two teeth on each side of the wick are immediately above the slots on either side of the carrier.
  5. Gently squeeze the wick above the teeth and ease it down so that the tower teeth engage in the bottom slots and the upper teeth in the top slots. The ends of the wick tails should now be about 1/2” below the bottom of the carrier.
  6. Grasp the ends of the tails together with the bottom of the carrier and gently draw the assembly over the centre tube of the tank until the bottom of the wick tails are Level with the top of the tank.
  7. Hold the wick carrier firmly with one hand then carefully pull the top of the wick up so that both sets of teeth engage in the upper slots. Tear paper tabs from wick.
  8. Line up rack on the wick carrier with the winder cog and gently push the assembly down until the rack engages with the winder cog. Then turn the wick down with the winder ensuring at the same time that the tape on the inside of the wick does not catch on the top of the centre tube.
  9. Replace burner basket and lock firmly in position by turning clockwise. Replace the flame spreader.
  10. Replace burner in tank. Fill container with paraffin and allow the new wick to soak for at least one hour before lighting.

Something wrong with our product description? Please Contact Us. We'll check and put it right if needed.

Product Images: Images used on this site are for illustrative purposes only. Please do not base your order on the image alone. Packaging/product labelling, if shown may be changed by the manufacturer without notice.
Product images may not represent a true colour likeness and can vary when viewed on different monitors. Please see our Conditions of Use for further details.


Date First Available: Wednesday 01 June, 2011.

Copyright © 2022 M W Partridge & Co Ltd.