SALE - 10% OFF Selected Lines - On-Line Purchases Only

Shipping From Only £3.50

01473 822333

Aladdin No.201 & 202 Paraffin Heater Wick (P939907)

  • P939907

Sale: £13.50
Save: 10% off

4 units In Stock

Add to Cart:

Delivery From £3.50 - Delivered to Mainland England, Wales and Southern Scotland For an accurate delivery quotation, please use our shipping estimator by adding item to basket and enter a delivery post code.

Product Description

Aladdin Wick For No. 201 & 202 Burner

  • No. 201 & 202 Wick
Suitable For:
  • Aladdinique (Series II) Manufactured with locking type 2" burner (No.201) from 1955 to early 1966. current model (Series II) uses clamp fitting 2" burner (No.202)
  • Internal diameter: 46mm (1.820 inch) approx
  • External diameter: 52mm  (2.0039 inch) approx
  • Model no.: P939907
  • EAN: 5020548939070

Product Documents

Aladdin Wick Identification Chart Aladdin Wick Identification Chart
Aladdin Aladdinique (Series II) 1955 to Early 1966 Parts List Aladdin Aladdinique Series II Parts List
Aladdin Aladdinique Sevice Instructions Aladdin Aladdinique Service Instructions
Aladdin Aladdinette (Series 10) 1962 to 1966 Parts List Aladdin Aladdinette (Series 10) 1962 to 1966 Parts List
Aladdin Aladdinette II (Series 19) Parts List Aladdin Aladdinette II (Series 19) Parts List
Aladdin De Luxe (Series 12) 1959 to 1966 Parts List Aladdin De Luxe (Series 12) 1959 to 1966 Parts List
Aladdin Duet Heater (Series 13) 1964 to 1966 Parts List Aladdin Duet Heater (Series 13) 1964 to 1966 Parts List

PDF files on this page are for personal use only. If your computer can't open them, you may not have software that opens PDF files. Please use the following link to obtain the latest version of Adobe Reader: Download Adobe Reader

Product Details
  • Our Code: P939907
  • Product Weight: 0.05kg
  • 4 Units in Stock
  • Manufactured by: Aladdin

Additional Information


  1. Remove burner from tank.
  2. Take out flame spreader (perforated cap in centre of burner).
  3. Remove outer wick tube by turning anticlockwise and lifting.
  4. Turn wick up fully and pull it out of burner with wick carrier.
    (The burner is now ready for new wick to be fitted). Keep carrier and throw old wick away.
  5. Pass paper tabs on new wick through the two semi-circular slots in burner base. Pull tabs until bottom of tape inside wick is just below top edge of centre tube.
  6. With arms uppermost fit carrier to burner on winder side so that the rack slides over guide inside large tube.
  7. Push carrier down until rack just engages with winder cog. Hold top of wick and turn winder anti-clockwise slowly until carrier arms engage with wick clips. Ensure that they are properly engaged then turn down wick.
  8. Pull tails of wick evenly so that wick carrier rack engages with wick winder mechanism inside large tube. Turn down wick as far as possible.
  9. Replace flame spreader (holes uppermost).
  10. Replace outer wick tube by locking it under all three pips inside rim of burner.
  11. Tear paper tabs from wick. Replace burner in tank. Fill container with paraffin and allow the new wick to soak for at least one hour before lighting.

Something wrong with our product description? Please Contact Us. We'll check and put it right if needed.

Product Images: Images used on this site are for illustrative purposes only. Please do not base your order on the image alone. Packaging/product labelling, if shown may be changed by the manufacturer without notice.
Product images may not represent a true colour likeness and can vary when viewed on different monitors. Please see our Conditions of Use for further details.


Date First Available: Wednesday 01 June, 2011.

Copyright © 2022 M W Partridge & Co Ltd.